Black Gold Directions for Use

For best results, shake well before each use. These are truly blended products that will separate over time, so keep them mixed!

First time use - if your sprayer is not attached to the bottle for shipping purposes, unscrew the black cap and remove the RED shipping plug from the bottle. It fits pretty tight and may be a little difficult to remove. Insert the sprayer tube into the bottle and push down HARD to screw the sprayer onto the bottle. It may seem like the tube is too long, but it will bend at the bottom once pushed down hard. This allows you to get to all of the product when the bottle is running close to empty.

SHAKE TO MIX THROUGHOUT USE

Turn the sprayer end to the mist setting and spray Black Gold on the surface and some into a clean microfiber towel, then wipe to cover generally a 3'x3' area with an even coating. After coating the area, use a separate towel to wipe dry and buff off to a shine. Especially on darker colors, come back after a few minutes for a light final buff.

This can be used on paint, plastics, headlights and glass. Works best on dry surfaces and in the shade but can also be used in the sun. We have also had great results to brighten up the plastic windows on convertible tops and Bronco or Jeep soft tops.

If your paint has swirls and light scratches, use our new Red River All-In-One for paint correction before applying Black Gold.

Once finished, turn the sprayer to the off position to prevent the product from leaking from the end of the sprayer.

Now for the legal stuff: Short answer - don't eat it, drink it or rub it on your naked body. Here is the required answer: